Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Makita DVC863LZ
Summary of Contents for Makita DVC863LZ
- Page 1 INSTRUCTION MANUAL Cordless Vacuum Cleaner DVC862L DVC863L Read before use.
-
Page 2: Specifications
WARNING This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capa- bilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. -
Page 3: Ec Declaration Of Conformity
Clean the water level limiting device regularly Noise and examine it for signs of damage. Do not use the cleaner without the filter. The typical A-weighted noise level determined accord- Replace a damaged filter immediately. ing to 60335-2-69: AVOID UNINTENTIONAL STARTING. Be sure Model DVC862L switch is OFF when installing battery(ies). - Page 4 It will SAVE THESE INSTRUCTIONS. also void the Makita warranty for the Makita tool and charger. WARNING: DO NOT let comfort or familiarity...
-
Page 5: Functional Description
To remove the battery cartridge, slide it from the tool FUNCTIONAL while sliding the button on the front of the cartridge. DESCRIPTION CAUTION: Always install the battery cartridge fully until the red indicator cannot be seen. If not, it may accidentally fall out of the tool, causing injury to CAUTION: Always be sure that the tool is you or someone around you. -
Page 6: Overload Protection
Overload protection Indicating the remaining battery capacity When the tool is operated in a manner that causes it to draw an abnormally high current, the tool automatically stops without any indication. In this situation, turn the tool off and stop the application that caused the tool to become overloaded. -
Page 7: Parts Description
Auto-suction stop during wet suction operation Only for the cloth filter model WARNING: Do not use for a long time while the float is at work. Using the cleaner with its float at work for a long time can cause overheat, resulting in the cleaner deformation. - Page 8 Model DVC863L (Powder filter (for dry dust) model) ► 1. Float 2. Float cage Place the prefilter in the tank with aligning the mounting position markings. Mount the damper on the powder filter and then place them in the prefilter with aligning the mounting position markings.
-
Page 9: Installing The Water Filter
Remove the rubber holder. Installing the water filter Only for cloth filter model (optional accessory) CAUTION: Never pick up water or wet dust with- out the float and the cloth filter or the water filter. CAUTION: For picking up wet dust, make sure that the float cage and the float are installed on the cleaner. -
Page 10: Installing The Tool Box
Unhook and lift up the tank cover. Shake off the dust from the cloth filter / prefilter and then take the polyethylene bag out of the tank. NOTE: Take the polyethylene bag carefully out of the tank so that the polyethylene bag cannot be caught and torn by the protrusion inside the tank when emp- tying it. -
Page 11: Maintenance
Connecting the hose NOTICE: Never force the hose for bending or stamp it. Never move the cleaner by a hose. Forcing, stamping and pulling the hose may cause a breakage or deformation of the hose. NOTICE: When picking up large wastes such as planer carvings, concrete dusts or similar other than small wastes, use the 38 mm inner diameter hose (optional accessory). -
Page 12: Optional Accessories
OPTIONAL ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.