Makita DVC860L Technical Information page 16

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -5. Float section
ASSEMBLING
Paying attention to the matters in Fig. 17, assemble Float section, taking reverse step of Fig. 16.
Fig. 17
(46)
(46)
[3] -6. Caster
DISASSEMBLING
Disassemble Casters from Tank. Fig. 18
Fig. 18
Slotted head screwdriver
Groove of (64)
Slotted head screwdriver
1. Mount Rubber seal 70 (47) to Float complete (46).
(47)
(47)
2. Facing Rubber seal 70 (47) to Tank cover complete (43) side,
(43)
Inlet
(62)
(62)
(61)
1R263
mount Float complete (46) to Tank cover complete (43).
(64)
(61)
1. Make a gap for 1R263 by applying
Slotted head screwdriver to the
1R263
joint of Caster 50 (62) and Tank (64).
2. Remove Caster 50 (62) by levering it
up with 1R263, inserted to the gap,
made by slotted head screwdriver.
3. Slide Slotted head screwdriver in the
groove of Tank (64) until it touches the
leg of Caster 50 (61) and then slightly
lift up Caster 50 (61).
4. Remove Caster 50 (61) by levering it
up with 1R263.
P 16/ 29