Install Cisco Microsoft Windows Xp Usb Driver; Install Cisco Microsoft Windows 2000 Usb Driver; Install Cisco Microsoft Windows Vista Usb Driver - Cisco 4000 Series Hardware Installation Manual

Chapter 3 Install and Connect Cisco 4000 Series ISRs

Install Cisco Microsoft Windows XP USB Driver

Before you begin, download the appropriate driver for your router model from the Cisco Software
Download site, USB Console Software category:
http://www.cisco.com/cisco/software/navigator.html?mode=prod
Unzip the file Cisco_usbconsole_driver_X_X.zip (where X is the revision number).
Step 1
If you are using 32-bit Windows XP, double-click the file setup.exe from the Windows_32 folder; if you
Step 2
are using 64-bit Windows XP, double-click the file setup(x64).exe from the Windows_64 folder.
The Cisco Virtual Com InstallShield Wizard begins.
Click Next. The Ready to Install the Program window appears,
Step 3
Click Install. The InstallShield Wizard Completed window appears.
Step 4
Click Finish.
Step 5
Connect the USB cable to the PC and router USB console ports. See
Step 6
console port turns green, and the Found New Hardware Wizard displays. Follow the instructions in the
wizard to complete the installation of the driver.
The USB console is ready for use.

Install Cisco Microsoft Windows 2000 USB Driver

Obtain the file Cisco_usbconsole_driver.zip from cisco.com and unzip it.
Step 1
Double-click the file setup.exe. The Cisco Virtual Com InstallShield Wizard begins.
Step 2
Click Next. The Ready to Install the Program window appears.
Step 3
Click Install. The InstallShield Wizard Completed window appears.
Step 4
Click Finish.
Step 5
Connect the USB cable to the PC and router USB console ports. See
Step 6
console port turns green, and the Found New Hardware Wizard window displays. Follow the instructions
in the wizard to complete the installation of the driver.
The USB console is ready for use.

Install Cisco Microsoft Windows Vista USB Driver

Obtain the file Cisco_usbconsole_driver.zip from cisco.com and unzip it.
Step 1
Step 2 If you are using 32-bit Windows Vista, double-click the file setup.exe from the Windows_32 folder; if
your are using 64-bit Windows Vista, double-click the file setup(x64).exe from the Windows_64 folder.
The Cisco Virtual Com InstallShield Wizard begins.
Click Next. The Ready to Install the Program window appears,
Step 3
Click Install. The InstallShield Wizard Completed window appears.
Step 4
OL-32185-02
Hardware Installation Guide for Cisco 4000 Series Integrated Services Routers
Install Cisco Microsoft Windows USB Device Driver
Table 3-1. The EN LED for the USB
Table 3-1. The EN LED for the USB
3-25