Remove Dimm - Cisco 4000 Series Hardware Installation Manual

Install and Remove DDR DIMMs on Cisco 4400 or 4300 Series ISRs
DIMMs have a polarization notch on the mating edge to prevent incorrect insertion.
the polarization notch on a DIMM.
Figure 5-21
1

Remove DIMM

To remove a DIMM:
Read the
Step 1
replace any module.
Remove the chassis cover. See the
Step 2
Locate the DIMM module. See the
Step 3
section on page 5-8
Hardware Installation Guide for Cisco 4000 Series Integrated Services Routers
5-26
DIMM Showing Polarization Notch
Polarization notch
"Safety Warnings" section on page 5-2
to find the DIMM sockets on the router.
Chapter 5
1
section and disconnect the power supply before you
"Remove and Replace Chassis Cover" section on page
"Locate Internal and External Slots for Modules on Cisco 4451 ISR"
Install and Upgrade Internal Modules and FRUs
Figure 5-21 shows
5-4.
OL-32185-02