Connecting To The Console Port With Linux; Installing The Cisco Microsoft Windows Usb Device Driver; Installing The Cisco Microsoft Windows Xp Usb Driver - Cisco WS-C2950-24 Installation Manual

Installing the Cisco Microsoft Windows USB Device Driver

macbook:user$ screen /dev/tty.usbmodem1a21 9600
To disconnect the OS X USB console from the Terminal window
Enter Ctrl-a followed by Ctrl-\

Connecting to the Console Port with Linux

This procedure shows how to connect a Linux system USB port to the console using the built in Linux
Terminal utility.
Open the Linux Terminal window.
Step 1
Connect the Linux USB port to the router.
Step 2
Enter the following commands to find the Linux USB port number
Step 3
root@usb-suse# cd /dev
root@usb-suse /dev# ls -ltr *ACM*
crw-r--r--
root@usb-suse /dev#
Connect to the USB port with the following command followed by the router USB port speed
Step 4
root@usb-suse /dev# screen /dev/ttyACM0 9600
To disconnect the Linux USB console from the Terminal window
Enter Ctrl-a followed by : then quit
Installing the Cisco Microsoft Windows USB Device Driver
A USB device driver must be installed the first time a Microsoft Windows-based PC is connected to the
USB serial port on the router.
This section contains the following topics:
•
•
•

Installing the Cisco Microsoft Windows XP USB Driver

This procedure shows how to install the Microsoft Windows XP USB driver. Download the driver for
your router model from the Tools and Resources Download Software site, USB Console Software
category:
www.cisco.com/cisco/pub/software/portal/select.html?mdfid=268437899&?i=rp
Step 1 Unzip the file Cisco_usbconsole_driver_X_X.zip (where X is a revision number).
Cisco 2900 and 3900 Series Hardware Installation
3-36
1 root root
"Installing the Cisco Microsoft Windows XP USB Driver"
"Installing the Cisco Microsoft Windows 2000 USB Driver"
"Installing the Cisco Microsoft Windows Vista USB Driver"
Chapter 3
188, 0 Jan 14 18:02 ttyACM0
Installing and Connecting the Router
OL-18712-01