Cisco 4000 Series Hardware Installation Manual page 13

Chapter 1 Overview of Cisco 4000 Series ISRs
Figure 1-3
1 SM-X slot 1
3 SM-X slot 3
To remove an SM-X:
Read the
Step 1
Access the SM-X slot. See
Step 2
Loosen the captive screws to open the slot cover.
Step 3
Pull the SM-X out of the connector on the motherboard. Keep the SM-X parallel with the motherboard
Step 4
to prevent damage to the slot and standoff.
When you remove the SM-X slot 2,
Note
See Figure
Place the SM-X in an anti-static bag to protect it from ESD damage.
Step 5
For more details on installation of SM-Xs, NIMs, and Cisco E-Series Server Modules, see the hardware
Note
installation guide for the particular module you have purchased.
OL-32185-02
NIM and SM-X Slots
"Safety Warnings" section and disconnect the power supply before you replace any module.
Figure 1-3
it removes the blank slot which is attached to the special divider.
1-4.
Hardware Installation Guide for the Cisco 4000 Series Integrated Services Router
2 SM-X slot 2
for the various NIM and SM-X slot locations.
Chassis Views
1-5