Cisco 4000 Series Hardware Installation Manual page 143

Chapter 5 Install and Upgrade Internal Modules and FRUs
To remove the SSD one at a time, pull the two tabs on the front of each SSD as shown in
Step 3
Rotate the SSD card slot cover up and place it over the SSDs.
Step 4
Tighten the captive fasteners on the SSD card slot cover.
Step 5
Figure 5-14
1 Carrier card slot cover
OL-32185-02
Pulling Out the Solid State Drives
1
Hardware Installation Guide for Cisco 4000 Series Integrated Services Routers
Overview of the SSD Carrier Card NIM (NIM-SSD)
1
Figure 5-14.
5-19