General Safety Warnings - Cisco 4000 Series Hardware Installation Manual

Standard Warning Statements

General Safety Warnings

Read the installation instructions before you connect the system to its power source. Statement 1004
Warning
Ultimate disposal of this product should be handled according to all national laws and regulations.
Warning
Statement 1040
Installation of the equipment must comply with local and national electrical codes. Statement 1074
Warning
Warning To comply with the Class A emissions requirements shielded twisted pair T1/E1 cables must be used
for SPA-8-Port Channelized T1/E1 SPA (SPA-8XCHT1/E1) on the router. EN55022/CISPR22 Statement
Warning To comply with Class A emissions requirements- shielded management Ethernet, CON, and AUX
cables on the router must be used.
Power cable and AC adapter - When installing the product, please use the provided or designated
Warning
connection cables/power cables/AC adaptors. Using any other cables or adapters could cause a
malfunction or a fire. Electrical Appliance and Material Safety Law prohibits the use of certified
cables (that have the 'UL' shown on the code) for any other electrical devices than products
designated by Cisco. The use of cables that are certified by Electrical Appliance and Material Safety
Law (that have 'PSE' shown on the code) is not limited to Cisco-designated products. Statement 371
Only trained and qualified personnel should be allowed to install or replace this equipment
Warning
Statement 1030
This product relies on the building's installation for short-circuit (overcurrent) protection. Ensure that
Warning
the protective device is rated not greater than: AC power supplies for the Cisco 4000 Series ISRs.
Statement 1005
This product requires short-circuit (overcurrent) protection to be provided as part of the building
Warning
installation. Install only in accordance with national and local wiring regulations. Statement 1045
Warning This unit may have more than one power supply connection. All connections must be removed to
de-energize the unit. Statement 1028
Hardware Installation Guide for the Cisco 4000 Series Integrated Services Router
2-2
Chapter 2 Cisco 4000 Series ISRs Preinstallation
OL-32185-02