Cables can be obtained from the following vendors:
•
AT&T
•
Siemens
•
Red-Hawk
•
Anixter
•
AMP
For TAXI 4B/5B traffic over multimode fiber, use the multimode MIC interface cable to connect the
AIP with the external ATM switch. (See Figure 2-4.)
Figure 2-4
Multimode Network Interface Connector (MIC Type)
For SONET/SDH multimode connections, use one multimode duplex SC connector (see Figure 2-5)
or two single SC connectors. (See Figure 2-6.)
Figure 2-5
Duplex SC Connector
Figure 2-6
Simplex SC Connector
Preparing Network Connections
Preparing for Installation 2-87