Tools Required - Cisco 7000 Hardware Installation And Maintenance

Tools Required

You need a number 1 Phillips or 3/16-inch flat-blade screwdriver to remove the top front chassis
panel.
Warning
cord. The backplane carries high voltages when the system is operating.
Figure 5-30
LED board
(mounted on horizontal
plane in chassis)
Before accessing the chassis interior, turn the system power OFF and unplug the power
Internal Chassis Components
LEDs
Arbiter board
connector
Blower power
connection
LED board spring
Blower air ducts to
interface processor
compartment
Replacing Internal Components
Maintenance 5-239