Cisco 7000 Hardware Installation And Maintenance page 118

Site Log
Component
Other optional equipment
Documentation
System components:
RP
SP
SSP
RSP7000
RSP7000CI
AIPs
CIPs
EIPs
FEIPs
TRIPs
FIPs
FSIPs
HIPs
MIPs
Other optional equipment:
2-114 Cisco 7000 Hardware Installation and Maintenance
Description
FDDI interface cables, 1 or 2 multimode, 2 or 4 single-mode for each FIP
HSSI interface cable, 1 per port required
Null modem cable for back-to-back HSSI connections
MIP cables, 1 per port required
AIP cables and types, 1 per AIP port required
Ethernet/Fast Ethernet transceiver or 802.3 attachment unit
MAU, CSU/DSU for network connections
Flash memory card
Cisco 7000 User Guide and UniverCD (ship with chassis), and any printed documentation as
ordered
Processor slots 5 and 6 should contain an SP (or SSP) and RP, or an RSP7000 (slot 5) and an
RSP7000CI (slot 6), and any combination of 5 interface processors or blank interface processor
fillers
Installed in the RP slot (rightmost slot)
Installed in SP slot instead of SSP (immediately left of the RP)
Installed in SSP slot instead of SP (immediately left of the RP)
Installs in the SP (or SSP) slot (slot 5) instead of the SP (or SSP). Used with the RSP7000CI.
Installs in the RP slot (slot 6) instead of the RP. Used with the RSP7000.
Enter slot locations and port addresses on Configuration Worksheet
Enter slot locations and port addresses on Configuration Worksheet
Enter slot locations and port addresses on Configuration Worksheet
Enter slot locations and port addresses on Configuration Worksheet
Enter slot locations and port addresses on Configuration Worksheet
Enter slot locations and port addresses on Configuration Worksheet
Enter slot locations and port addresses on Configuration Worksheet
Enter slot locations and port addresses on Configuration Worksheet
Enter slot locations and port addresses on Configuration Worksheet
Rec'd