Home Automation Server And Associated Components; Connection Details Of Honeywell Home Automation Server - Honeywell HAS-QNH Reference Manual

Home Automation Server and Associated Components

Part No.
HAS-QNH
OPTIONS
HAS-DIGNEO4CRD
HAS-DIGNEO4CAB
HAS-SATA250
HAS-WXPPRO

Connection Details of Honeywell Home Automation Server

The diagram below shows typical connections of the Honeywell Home Automation
Server. Dependent upon the model server you have purchased, certain server
connections and functions may or not be provided. The exact details of the
connections supported by your server can be found on the CD and/or documentation
supplied with it.
NOTE: The figure above shows a typical server configuration and may not reflect
your actual server configuration. You must refer to the documentation supplied
with your server for the actual configuration of your equipment.
Item Color
A Green
B Purple
C Teal
D Burgundy
E
F
G, I
H
J Orange
K Black
L Blue
M
N Pink
O Lime Green
Product Description
Honeywell Home Automation Server (HAS), 512 Mb RAM, Intel P4
Processor
4 serial port Digi board
This module is needed to connect the Lighting Modules,
•
Security or HVAC Systems with the Honeywell Home
Automation Server using RS232C Communication.
• User Reference Guide
CD Rom
•
NOTE: Both this card and cable HAS-DIGNEO4CAB are required and
cannot be used alone.
Serial RS-232 DB-9 Octopus cable for Digi board
250 GB SATA Hard Drive
Windows XP PRO OEM Software license and CD.
Honeywell Home Automation Server Connections
Description
PS/2 mouse port
PS/2 keyboard port
Serial port
Parallel port
VGA port
IEEE-1394a connector
USB ports
LAN
Center channel and LFE (subwoofer) audio line out jack
Surround L-R audio line out jack
Audio line in jack
Digital audio out(optical)
Mic in jack
Front L-R audio line out / Two channel audio line out jack
– 7 –