Honeywell SmartVFD HVAC2 Applications Manual page 68

Code Monitoring signal
V4.5 Process
V5.1 Fire mode status
V5.2 Fire mode counter
V5.3 Warranty affected device
Parameter menu
In Parameter menu only the Quick setup
parameter list is shown as default. By giving the
value 0 to the parameter 17.2, it is possible to
open other advanced parameter groups. The
Table 24. Monitoring values
Unit ID
29 Scaled process variable
see "P14.18" on page 111
0
1597 = Disabled
1
= Enabled
= Activated (Enabled + DI Open)
2
3
= Test Mode
1679 Fire mode counter tells how many times fire mode
has been activated. This counter can not be reset.
1
1682 = Device is warranty affected as critical faults
triggered in fire mode
0
= Normal device
parameter lists and descriptions can be found in
"STANDARD application parameters" on page 72
and "Parameter descriptions" on page 124.
The following figure shows the parameter menu
view:
68
Description
31-00108—07