Honeywell SmartVFD HVAC2 Applications Manual page 64

Code Monitoring signal
V1.1 Output frequency
V1.2 Frequency reference
V1.3 Motor speed
V1.4 Motor current
V1.5 Motor torque
V1.6 Motor shaft power
V1.7 Motor voltage
V1.8 DC-link voltage
V1.9 Unit temperature
V1.10 Motor temperature
V1.11 Output Power
V2.1 Analog input 1
V2.2 Analog input 2
V2.3 Analog output
V2.4 Digital input status DI1,
DI2, DI3
V2.5 Digital input status DI4,
DI5, DI6
Table 24. Monitoring values
Unit ID
Hz 1 Output frequency to motor
Hz 25 Frequency reference to motor control
rpm 2 Calculated motor speed
A 3 Measured motor current
% 4 Calculated actual / nominal torque of the motor
% 5 Calculated actual / nominal power of the motor
V 6 Motor voltage
V 7 Measured DC-link voltage
°C 8 Heatsink temperature
% 9 Calculated motor temperature
KW 79 Output power from drive to motor
% 59 AI1 signal range in percent of used range
% 60 AI2 signal range in percent of used range
% 81 AO signal range in percent of used range
15 Digital input status
16 Digital input status
64
Description
31-00108—07