Honeywell SmartVFD HVAC2 Applications Manual page 56

Group 1 - 5; Drive status
1. Drive is ready to start (READY)
2. Drive is running (RUN)
3. Drive has stopped (STOP)
4. Alarm condition is active (ALARM)
5. Drive has stopped due to a fault (FAULT)
Group 6 - 10; Control selections
When API is operated by PC control, there are no
arrowhead at I / O, KEYPAD and BUS.
6. Motor is rotating forward (FWD)
7. Motor is rotating reverse (REV)
8. I/O terminal block is the selected control
place (I / O)
9. Keypad is the selected control place (KEY-
PAD)
10. Fieldbus is the selected control place (BUS)
Group 11 - 14; Navigation main menu
11. Reference main menu (REF)
12. Monitoring main menu (MON)
13. Parameter main menu (PAR)
14. System main menu (SYS)
11
12
13
14
STOP
Fig. 37. SmartVFD HVAC2 Control panel
56
1 2 3 4
6 7 8 9
5
10
START
MCR36494
31-00108—07