Honeywell SmartVFD HVAC2 Applications Manual page 62

Reference menu
RE ADY
RE F
M O N
PA R
SYS
F WD
Press to enter
edit mode
Fig. 39. Reference menu display
R U N S T OP ALAR M FAULT
Hz
REV I/O KEY PA D B US
Change
value
Move to the reference menu with the UP / DOWN
button (see Figure "The main menu of SmartVFD
HVAC2" on page 61). The reference value can be
changed with UP / DOWN button as shown in
Figure "Reference menu display" on page 62.
If the value has big change, first press Left and
Right buttons to select the digit which has to be
changed, then press Up button to increase and
Down button to decreases the value in the
selected digit. The changing reference frequency
will been taken into use immediately without
pressing OK.
NOTE: LEFT and RIGHT buttons can be used to
change the direction in Ref menu in local
control mode.
62 31-00108—07