GSMHS Installation and Setup Guide
LED COLOR
GREEN
YELLOW
RED
ALL
an Unregistered GSMHS Status Display in Normal Operating State(B)
Figure A-4. LED Sequence for a Registered GSMHS Message Transmission
A-2
Table A-1. Status Display Operation
LED
DESCRIPTION
STATUS
ON – GSMHS is NOT registered with AlarmNet.
OFF – GSMHS is registered with AlarmNet.
FAST BLINK – Download session with Compass in progress.
SLOW BLINK – In unison with yellow LED – Registration in
MESSAGE
ON – Message transmission pending.
QUICK PERIODIC BLINK - Normal
FAST BLINK – Message waiting for network ACK.
SLOW BLINK – Idle, power abnormal.
FAULT
ON – No contact with network.
OFF– Normal.
SLOW BLINK – Loss of communication with the control panel
FAST BLINK – No network contact AND loss of communication
FAST BLINK – In unison with the RSSI Bar Graph LEDs –
STATUS, GREEN
MESSAGE, YELLOW
FAULT, RED
Figure A-3. A Registered GSMHS Status Display (A) and
STATUS, GREEN
MESSAGE, YELLOW
progress.
– In unison with green LED – Registration in
progress.
(ECP fault).
with the control panel.
Hardware Error. Call the AlarmNet Technical
Assistance Center.
A
STATUS, GREEN
MESSAGE, YELLOW
1
2
3
FAULT, RED
B
FAULT, RED
4