Appendices; Appendix A: Summary Of Led Operation; Status Display Operation - Honeywell AlarmNet GSMHS Installation And Setup Manual

                                                

Appendix A: Summary of LED Operation

Status Display Operation

The Status Display has three LEDs used to indicate message and device status:
 STATUS, green
 MESSAGE, yellow
 FAULT, red
Figure A-1. Status Display LEDs with Front Cover Installed
Each LED can have four different states - ON, OFF, FAST BLINK and SLOW BLINK.
Throughout this document, the following key is used to describe LED state:
GREEN
(STATUS)
YELLOW
(MESSAGE)
RED
(FAULT)
ON OFF
Figure A-2. LED Key
FAST BLINK SLOW BLINK

Appendices

7845i-GSM-012-V0
A-1