Bwx 8305 Basestation Antenna Installation - Cisco BWX 8305 Installation And Commissioning Manual

Chapter 6 Installation
Figure 6-2

6.3 BWX 8305 Basestation Antenna Installation

Reference:
•
•
•
Check all regulatory requirements prior to installing the BWX 8305 Basestation Antenna.
6.3.1 Description
The BWX 8305 Basestation Antenna is the part of the BSn that contains the Power Amplifiers (PAs), the
8 antenna elements, and, depending on frequency and customer choice, Channel Filters and Low Noise
Amplifiers (LNAs). A BWX8305 Basestation Antenna radiates 120 degrees
Channel Filters in a BWX 8305 Basestation Antenna is optional. These filters are installed inside the
BWX 8305 Basestation Antenna, which is shipped separately from the BS.
OL-16336-02
Company Info Worksheet
Company Name
Site Name
Address
City,State
Zip, Country
Name
Email Address
Address
City,State
Country
Phone
BTS ID
BTS Name
BTS Type
Installer Name
Phone
Date
40-00xxx-xx Rev 1.8 Version
Appendix B, "Cisco Recommended Tools"
Appendix H, "BWX Antenna Channel Filter Installation Procedure"
Appendix I, "Guidelines for Painting a Cisco Antenna"
BWX 8305 Basestation Antenna Installation
0
Reset Company Info
Site Location
Contact Information
BTS Configuration
Deployment
Read B TS Ex port File (*. txt)
Save Workbook
BWX 2305 Basestation Installation and Commissioning Guide
(Figure 6-3). The use of
6-3