Inventory - Cisco BWX 8305 Installation And Commissioning Manual

Installation

6.1 Inventory

Reference:
The first thing an installer physically does once onsite is to check to see that all equipment and materials
have arrived, as well as to make sure all necessary documents and forms are available. This is when the
installer will first work with the Cisco Closeout Tool by entering the site information for the BS
components. The Closeout Tool is an Excel spreadsheet with linked worksheets and calculations to
automate the system deployment information. The Closeout Tool is explained under the next heading in
this chapter.
The installer and/or customer should keep a copy of the collected data/Closeout Tool form for future
Note
reference.
As you inventory the BWX 8305 Basestation (BS) components, check to ensure the following
attachments are visible:
•
•
•
Do not try to use former values, i.e., from a previous site, for any of the above three items. Each
measurement is unique to that piece of equipment and must be entered exactly as stated for this
deployment.
OL-16336-02
Appendix G, "Closeout Tool Form & Procedure"
Manufacturing printout sheet attached to the BWX 8305 Basestation Antenna, showing the antenna
insertion loss or gain values in the transmit and receive direction at the lower, middle, and higher
frequencies (Figure 6-1).
Compact disk (or other media) attached to BWX 8305 Basestation Antenna
the antenna configuration data specific to that BWX 8305 Basestation Antenna.
Manufacturing printout sheet attached to the bundled RF cables (RG-6 or RG-11). This sheet
contains the cable loss values for the bundled cable. These values will be entered in the Closeout
Tool. These data are specific to each bundled cable.
C H A P T E R
BWX 2305 Basestation Installation and Commissioning Guide
6
(Figure 6-1). It contains
6-1