Cisco BWX 8305 Installation And Commissioning Manual page 27

Chapter 4 I&C Process
4.3 Pre-installation
Pre-Installation – (for each BS, prior to cell site installation)
OL-16336-02
A
Obtain BS-specific information:
(BTS ID, Name, IP address,
Subnet mask, Gateway IP,
Antenna Power, RX Sensitivity,
,etc.)
Obtain Antenna-specific
information:
(Azimuth, tilt, elevation, etc.)
In the Test EMS,
add and configure
a BWG Record
In the Test EMS,
add and configure
a BS Record
Edit and run the RFS script
AT THIS POINT THE RECORD
IS READY TO BE ASSIGNED
TO A REAL BS
BWX 8305 Basestation Installation and Commissioning Guide
Pre-installation
Confirm mounting rack or
outdoor enclosure availability
Confirm that the
input power and grounding
are installed and ready
Confirm the customer backhaul
network availability at the site
Confirm that BS, Antenna,
cables, etc. have been delivered to
the cell site
B
4-3