Advertisement
3. Go to the Devices tab from the bottom navigation bar.
4. Select the + icon on the top right of the screen and pick Scan new device barcode.
5. Point your phone camera toward the hardware barcode to claim the device.
6. Enter device information and then select Done. Press Add another to claim a new device.
List of Compatible Gateways:
MV12(W/NE), MV22(X), MV32, MV72(X)
WARNING: Environmental sensors are only supported with second-generation MV cameras and Wi-Fi 6-compatible
APs.
Minimum Firmware Version
MV
MR
Wifi 5 APs - MR 28.3 +
MV 4.8 +
Wifi 6 APs - MR 27.6 +
Please refer to
Managing Firmware Upgrades
Installation Instructions
NOTE: Each MT12 comes with an instruction guide within the box. The Quick Install Guide (QIG) contains detailed step-
by-step guides and images to assist you in the physical installation of the sensors.
Choosing Your Mounting Location
As MT sensors rely on a gateway for connectivity to the dashboard, make sure that a working compatible gateway is in
MV
to schedule an upgrade.
MR36, MR44, MR45, MR46, MR46E, MR55, MR56,
MR76, MR86
MR
2
Advertisement
