Figure 2
Base of the Network Sensor – With AIR-MOD-POE-xx PoE/Ethernet Module
10/100/1000 BASE-T (Ethernet) Uplink
Interface with inline power capability,
Auto-MDIX (automatically support either
straight through or crossover cables), and
1
802.3af/at PoE-In
6
Installation Overview
Installing the network sensor involves these operations:
Step 1
Mounting and Powering the Network Sensor, page 10
Step 2
Configuring the Network Sensor for Wireless Service Assurance, page 22
Step 3
Configuring the Network Sensor for Wireless Service Assurance, page 22
1
USB port for powering the sensor, using 5V,
1.5A power.
2
2
9