Firmware Version; Factory Reset - Honeywell EchoView User Manual

The serial number is shown in the display:
Press [MODE] to return to the Settings menu. If you do not make a selection in 60 seconds, the unit
automatically exits to the menu.

7.1.4. Firmware Version

This shows the firmware version incorporated in the instrument. It is read-only. You cannot make
changes to the information. To view it, press [MODE] when its name is highlighted (dark circle):
Press [MODE] to return to the Settings menu. If you do not make a selection in 60 seconds, it
automatically exits to the menu.

7.1.5. Factory Reset

You can perform a factory reset to the instrument's original settings. To access it, press [MODE]
when its name is highlighted (dark circle):
You are asked whether you want to perform the factory reset:
To perform the reset, press [Y/+]. To exit without performing the reset, press [N/-].
EchoView User's Guide
20