Trigger All Relays; Trigger A Selected Relay; Clear Relays - Honeywell EchoView User Manual

8.7.1.

Trigger All Relays

With "All Relays" highlighted, press [MODE] to trigger all relays simultaneously.
8.7.2.

Trigger A Selected Relay

Scroll down the list of relays (1 through 5) by pressing [N/-]. Once you have highlighted the
individual relay you want to trigger, press [MODE]. This triggers only that one selected relay.
Note: The relay on the FMC2000 controller remains triggered until it is cleared, either at the
FMC2000 or at the EchoView.
8.7.3.

Clear Relays

Clear relays clears all of the relays on the controller, even if only one relay was triggered.
Select "Clear Relays" and then press [MODE] to clear the relays.
After clearing the relays, you can exit by using [N/-] to scroll down to "Exit." Then press [MODE].
The main screen is shown.
EchoView User's Guide
33