Settings; Buzzer On/Off - Honeywell EchoView User Manual

Settings provides information about your instrument. Some screens are read-only (you cannot edit them),
but other screens allow you to change settings.
Wireless consists of parameters you can set/change that affect wireless functionality, network
configuration, etc.

7.1. Settings

Settings include some read-only information (Serial Number and Firmware Version) and some settings
that you can change.
Press [Y/+] to scroll up or [N/-] to scroll down.
Note: Two more screens contain additional options:
Note: The scrolling "wraps," so once you reach the first or last item, it starts scrolling through the
items again.
Eight choices (including Exit) are available:

• Buzzer On/Off

• LCD Contrast
• Serial Number (read-only)
• Firmware Version (read-only)
• Factory Reset
• Edit Password
• Page Disable
• Exit
To make a selection, scroll until the circle to the left of your choice is black, and then press [MODE].
Note: If you do not make a selection in 60 seconds, it automatically exits to the main screen.
7.1.1. Buzzer On/Off
You can turn the buzzer (audible alarm) on or off. To access the parameter, press [MODE] when
its name is highlighted (dark circle):
EchoView User's Guide
18