Exit; Wireless - Honeywell EchoView User Manual

Press [Y/+] to change the setting. After the setting is accepted, this screen is shown (or one that
says "Page Disabled"):

7.1.8. Exit

Scroll until "Exit" is selected.
Press [MODE] to return to the Programming Menu.
Note: If you do not make a selection in 60 seconds, it automatically exits to the menu.

7.2. Wireless

Wireless consists of editable parameters and actions to configure, form, and test a closed-loop
wireless network.
Under Programming Menu, select "Wireless."
Press [Y/+] to scroll up or [N/-] to scroll down through wireless sub-menus.
Note: When you reach the last item and continue scrolling, a second screen appears:
The scrolling "wraps," so once you reach the first or last item of either screen, it starts scrolling
through the items in the other screen again.
Five choices (including Exit) are available:
• Ping Net
• PANID Setup
• Form Net
• Channel Setup
• Exit
EchoView User's Guide
23