Honeywell EchoView User Manual page 46

Next, place the EchoView into the enclosure:
1. Lift up the hinged cover of the enclosure.
2. Slide the EchoView into the enclosure from the top.
3. Close the cover of the enclosure.
4. Insert the hex screw into the cover's locking portion, and tighten it.
5. The EchoView is now ready to use.
1
Note: The sensor cover on the bottom of the enclosure can be removed so that the filter and
sensor can be inspected without removing the EchoView from the enclosure. Simply pull off the
cover and follow the maintenance procedures in this guide.
EchoView User's Guide
2 3
46
4 5