Putting A Call On Hold; Resuming A Call; Ending A Call; Transferring Calls - Cisco SPA 525g User Manual

Small business

Hide thumbs Also See for SPA 525g:

Table of Contents

Putting a Call on Hold

To put a call on hold, press the Hold button/Hold softkey. A series of beeps indicates the call is on

hold.

To resume a call, press the Resume softkey or the flashing red line button for the call or the Hold

hardkey. If you have multiple calls, all calls are put on hold except the active call.

To end a call:

•

If you are using the handset, hang up or press the EndCall softkey.

•

If you are using the speakerphone, press Speaker.

•

If you are using the headset, either press the Headset button (wired) or replace the receiver

(wireless).

You can perform types of transfers:

•

Attended—Call the person to whom you are transferring the call and speak to them before

transferring the call.

•

Blind—Transfer the call without speaking to the other party to whom you are transferring the call.

Table of Contents

Small business spa525g2