Cisco SPA 525g User Manual page 20

STEP 10 Scroll to Connect Automatically and press the Right Arrow key to turn to On.
STEP 11 Press Connect. The profile screen displays and a check mark appears next to the
headset if the connection was successful.
Using a Headset with Your IP Phone
Steps to use your headset with the IP phone might vary. Consult the user documentation for your
headset for more information.
• To use a wired headset, press Headset and dial the number to place a call, or press the headset
button to answer a ringing call.
• To use a non-Bluetooth wireless headset (such as Jabra or Plantronics), lift the receiver off hook
before speaking or listening through the headset.
• To use a Bluetooth headset, make sure your headset is powered on. Press Headset on your
phone (or, if supported, press Answer on your Bluetooth headset twice) and dial the number to
place a call. Press Answer on your Bluetooth headset to answer a ringing call. See the user
documentation for your Bluetooth headset for more information.
Switching Between the Handset/Headset/Speakerphone During a Call
Any of these audio devices can be used during a call. Only one device can be used at a time. The
handset can be on the hook when using the speaker or headset function.
To switch from the handset to the speaker, press Speaker and place the handset back on the hook.
To switch from the speakerphone to a headset, press Headset. To switch from the speaker to the
handset, pick up the handset. To switch from the headset to the speakerphone, press Speaker.
25