Using The Web Configuration Utility; Logging In To The Phone Web User Interface - Cisco SPA 525g User Manual

Using the Web Configuration Utility

Your Cisco IP Phone provides a web interface for the phone user that allows you to configure some
features of your phone by using a web browser. Your phone system administrator can allow you to
view the phone statistics and modify some or all of the parameters by using the phone web user
interface. The features of the Cisco SPA phones that can be modified by the user by using the
phone web user interfaceare described in this chapter; however, not all features are available on all
phones.

Logging in to the Phone Web User Interface

To log into the phone web user interface:
STEP 1 Get the IP address of your phone:
• Press Setup.
• Select to Status > Network Status.
• Scroll to view IP Address. This is the IP address of your phone.
STEP 2 On your PC, open a Web browser window. Your PC must be on the same
subnetwork as the phone.
STEP 3 Enter the IP address in the browser address bar. For example, 192.168.1.244. The
phone web user interface displays.
90