Cisco SPA 525g User Manual page 32

Using Wi-Fi Protected Setup
If your router has a WPS button, you can use Wi-Fi Protected Setup to add a new wireless network
profile.
STEP 1 Select Wireless Configuration and select Wi-Fi Protected Setup.
STEP 2 Choose one of the following options:
Push Button Configuration:
a.
b.
PIN Configuration
a.
b.
c.
d.
e.
f.
g.
Press the WPS button on your router.
On your phone, highlight Push Button Configuration and press Select. Your phone
might reboot before the Wi-Fi connection is established.
After selecting PIN Configuration on your phone, note the PIN displayed.
Connect to your router interface by using a PC by following the instructions provided
with your router.
If required, enter the user name and password. (By default, Linksys routers typically
use admin for the user name and admin for the password. Cisco routers typically use
cisco for the username and cisco for the password.)
Locate the Wireless Protected Setup configuration menu.
Enter the PIN into the field that allows you to setup wireless devices by using a PIN.
Save your changes.
On the Cisco SPA525G and Cisco SPA525G2, with PIN Configuration highlighted,
press Select. To add the connection as a profile, press OK. Your phone might reboot
before the Wi-Fi connection is established.
37