Pairing Your Cisco SPA525G2 with a Bluetooth-Enabled Mobile Phone
You can initiate pairing from the Cisco SPA525G2 or from your mobile phone. This feature is based
on the following standard Bluetooth profiles:
•
Phone Book Access Profile 1.0
•
Handsfree Profile 1.5
•
Handset Profile 1.1
Initiating Pairing from the IP Phone
The Cisco SPA525G2 connects to one Bluetooth device at a time. If multiple Bluetooth devices are
in range of the Cisco SPA525G2, the order of devices in the Bluetooth Configuration > Bluetooth
Profiles list is used, and the device with a higher priority is activated first.
STEP 1
Enable Bluetooth as described in the
STEP 2
Press Setup.
STEP 3
Scroll to User Preferences and press Select.
STEP 4
Scroll to Bluetooth Configuration and press Select.
STEP 5
Scroll to Bluetooth Mode and press the Right Arrow key to choose one of the following:
•
Handsfree—Your Cisco SPA525G2 operates as a handsfree device with a Bluetooth-enabled
mobile phone.
•
Phone—Your Cisco SPA525G2 pairs with a Bluetooth headset only. Choose this option if you do
not use the IP phone with a Bluetooth–enabled mobile phone.
•
Both—Your Cisco SPA525G2 operates with your Bluetooth-enabled mobile phone or Bluetooth
headset. (See
headsets.)
STEP 6
Scroll to Bluetooth Profiles and press the Right Arrow key to enter the profile screen.
STEP 7
Press Scan to scan for the Bluetooth device.
"Connecting Bluetooth Headsets" section
"Enabling Bluetooth"
for more information on Bluetooth
section.
71