Cisco SPA 525g User Manual page 52

Adding a New Contact
To add a new entry to the directory:
STEP 1 In the Personal Address Book screen, press Add.
STEP 2 Use the keypad to enter the name of the directory entry. When finished with the
name, use the Down Arrow key to navigate to the other fields.
TIP To enter numbers and letters, press Option and select Input All. To enter only numbers,
press Option and select Input Num. To clear all characters from an entry, press Option and
select Clear.
STEP 3 Enter the office, mobile, or home phone number, including any digits you must dial to
access an outside line and the appropriate area code, if necessary. You must enter at least
one phone number for a contact.
TIP To enter numbers and letters, press Option and choose Input All. To enter only numbers,
press Option and select Input Num. To enter an IP address, press Option and select Input IP.
To enter a star code, press Option and select Input Star Code. (See
clear all characters from an entry, press Option and select Clear.
STEP 4 (Optional) To change the ring tone for the caller:
Press the Right Arrow key to enter the Select Ring Tone screen.
a.
Scroll through the available ring tones.
b.
Press the Play button to play the selected ring tone or the Select button to assign that
c.
ringtone to the person whose number you are adding to the directory.
STEP 5 Press Save to save the entry.
"Using Star Codes,".) To
57