Cisco SPA 525g User Manual page 68

Initiating Pairing from Your Bluetooth-Enabled Mobile Phone
The procedure varies depending on your phone model. You must turn Bluetooth on, and it might be
necessary to configure a separate setting to make your mobile phone discoverable by other devices.
Before starting, it is helpful to find the MAC address of your Cisco SPA525G2 IP phone. Go to the
Setup menu and select Status > Product Information. The MAC address is listed.
The following procedure uses an Apple iPhone as an example:
STEP 1 On your iPhone, click Settings.
STEP 2 Under General, choose Bluetooth. Ensure Bluetooth is turned on.
STEP 3 In the Bluetooth Window, under Devices, find the MAC address of your Cisco
SPA525G2.
STEP 4 Select the MAC address of the Cisco SPA525G2.
STEP 5 Enter the PIN (the default is 0000) and press Connect.
When paired with your mobile phone, the Cisco SPA525G2 display screen assigns one of your line
buttons to the mobile phone. A mobile phone icon with a flashing lightning bolt icon is displayed
next to the mobile phone name, number, or other identifier (such as the phone model) for your
phone.
The name, number, or other identifier shown depends on what is configured on your mobile phone.
If you have not configured a name on your paired phone, the phone might display your phone
number or some other identifier (such as the phone model). The display name can vary, depending
on your phone model and configuration.
73