Using Basic Phone Functions
Putting a Call on Hold
Putting a Call on Hold
Resuming a Call
Ending a Call
Transferring Calls
Cisco Small Business IP Phone SPA 525/SPA 525G2 User Guide (SPCP)
Using Mute
To mute the phone microphone, speaker, or headset microphone, press the Mute
button on the phone. The button lights red. Press the Mute button again to unmute.
To put a call on hold, press the Hold button. A series of beeps indicates the call is
on hold.
To resume the call, press the flashing red line button for the call. If you have
multiple calls, all calls are put on hold except the active call.
To end a call:
•
If you are using the handset, hang up.
•
If you are using the speakerphone, press the Speaker button.
•
If you are using the headset, either press the Headset button (wired) or replace
the receiver (wireless).
•
Press EndCall to hang up one call, and preserve another call on the same line. If
necessary, remove the call from hold first.
You can transfer a call to another extension.
3
39