Cisco SPA 525g User Manual page 19

After enabling Bluetooth, create a profile for your headset:
STEP 1 Enable Bluetooth as described above.
STEP 2 Press Setup.
STEP 3 Scroll to User Preferences and press Select.
STEP 4 Scroll to Bluetooth Configuration and press Select.
STEP 5 Scroll to Bluetooth Mode and press the Right Arrow key to choose one of the following:
• Phone—Your IP phone pairs with a Bluetooth headset only. Choose this option if you will not
use the Cisco IP phone with a Bluetooth-enabled mobile phone.
• Handsfree—Your IP phone will operate as a handsfree device with a Bluetooth-enabled mobile
phone.
• Both—Your Cisco IP phone uses a Bluetooth headset or operates with a Bluetooth-enabled
mobile phone. Your IP phone will connect to only one device at a time (either the Bluetooth
headset or the Bluetooth-enabled mobile phone. (See
Bluetooth-Enabled Mobile Phone"
your mobile phone.)
If multiple Bluetooth devices are in range of the Cisco SPA 525G2, the order of devices in the
Bluetooth Configuration > Bluetooth Profiles list is used, and the device with a higher priority is
activated first.
STEP 6 Scroll to Bluetooth Profiles and press the Right Arrow key to enter the profile screen.
STEP 7 Press Scan to scan for your headset. Depending on the network environment (for
example, the number of Bluetooth devices and noise level), your Bluetooth headset might not
appear on the found devices list. Ensure the headset is powered on and has Bluetooth
activated, and retry the scan.
STEP 8 In the list of found devices, select your headset and press Select to edit the profile.
STEP 9 Scroll to PIN and enter the PIN for your Bluetooth headset.
"Using the IP Phone With Your
for more information on using the Cisco SPA525G2 with
24