Scanning for Available Networks
If your router has SSID (router name) broadcast disabled, it might not appear in the list of networks. In
that case, you must manually add the SSID (see
STEP 1
In the Wireless Profile window, press Scan.
STEP 2
In the list of available networks, scroll to the desired network and click Add to select
the highlighted network.
STEP 3
(Optional) Press the Right Arrow key under Security Mode to set the security options:
•
WEP—Wired Equivalent Privacy: You must enter the Default Transmit Key, Key Type and
Length, and the keys.
•
WPA PSK or WPA2 PSK: You must enter the Cipher Type (TKIP or AES CCMP) and the
shared key.
•
WPA/WPA2 Enterprise: This type of authentication requires some advanced expertise
because it involves setting up a radius server for authentication and, in some cases, creation
of certificates for both the radius server and the phone.
You must enter the Cipher Type (TKIP or AES CCMP) and the EAP Type:
STEP 4
Press Set.
TTLS—Enter the anonymous ID, choose whether the phone should check for
-
the server certificate, choose the TTLS Inner Protocol (MSCHV2, MSCHAP,
PAP, CHAP, or MD5), and enter the User ID and password.
LEAP—Enter the User ID and password.
-
TLS—Enter the User ID, choose whether the phone should check for the
-
server certificate, enter the User ID, and configure the Root certificate and
User certificate (see the
section).
Manually Adding a
Network).
"Uploading Security Certificates to the Phone"
39