Track - Cisco Nexus 7000 Series Command Reference Manual

track

track
To track the reachability of an object, use the track command. To remove the settings, use the no form
of this command.
Syntax Description
object-number
ip
sla
entry-number
reachability
Defaults
None
Command Modes Tracking configuration mode (config-track)
Command History Release
6.2(2)
Usage Guidelines
This command does not require a license
Examples This example shows how to track the reachability of an object:
switch(config)# track 1 ip sla 1 reachability
switch(config-track)#
Related Commands Command
ip sla
ip sla monitor
Cisco Nexus 7000 Series NX-OS IP Service Level Agreements (SLAs) Command Reference
1-60
track object-number ip sla entry-number reachability
no track object-number
Tracked object. The range is from 1 to 500.
Specifies the IPv4 protocol.
Specifies the IP Service Level Agreement (SLA)
Entry number. The range is from 1 to 2147483647.
Specifies the reachability.
Modification
This command was introduced.
Chapter 1
Description
Begins the configuration for an IP SLAs operation and enters IP SLA
configuration mode.
Begins the configuration for an IP SLAs operation and enters IP SLA
monitor configuration mode.
Cisco Nexus 7000 Series IP SLAs Commands
OL-27555-03