Ip Sla Group Schedule - Cisco Nexus 7000 Series Command Reference Manual

ip sla group schedule

ip sla group schedule
To perform group scheduling for Cisco NX-OS IP Service Level Agreements (SLAs) operations, use the
show ip sla group schedule command. To cause all the IP SLAs operations that belong to a
multioperation schedule to become inactive, use the no form of this command.
Syntax Description group-id
operation-ids
add operation-ids
delete operation-ids
reschedule
schedule-period seconds Specifies the amount of time (in seconds) for which the group of IP SLAs
ageout seconds
frequency seconds
Cisco Nexus 7000 Series NX-OS IP Service Level Agreements (SLAs) Command Reference
1-22
ip sla group schedule group-id {operation-ids | add operation-ids | delete operation-ids |
reschedule} schedule-period seconds [ageout seconds] [frequency [seconds | range
random-frequency-range]] [life {forever | seconds}] [start-time {hh:mm[:ss] [month day | day
month] | pending | now | after hh:mm:ss}]
no ip sla group schedule group-id
Identification number for the group of IP SLAs operation to be scheduled.
The range is from 0 to 65535.
List of one or more identification (ID) numbers of the IP SLAs operations
to be included in a new multioperation schedule. The maximum is up to 125
characters.
Indicate ranges of operation ID numbers with a hyphen. Individual ID
numbers and ranges of ID numbers are delimited by a comma. For example,
enter a list of operation ID numbers in any of the following ways:
•
•
•
Specifies the ID numbers of one or more IP SLAs operations to be added to
an existing multioperation schedule.
Specifies the ID numbers of one or more IP SLAs operations to be removed
from an existing multioperation schedule.
Recalculates the start time for each IP SLAs operation within the
multioperation schedule based on the number of operations and the
schedule period. Use this keyword after an operation has been added to or
removed from an existing multioperation schedule.
operations is scheduled. The range is from 1 to 604800.
(Optional) Specifies the number of seconds to keep the IP SLAs operations
in memory when they are not actively collecting information. The default is
0 (never ages out).
(Optional) Specifies the number of seconds after which each IP SLAs
operation is restarted. The frequency of all operations that belong to the
multioperation schedule is overridden and set to the specified frequency.
The range is from 1 to 604800.
The default frequency is the value specified for the schedule period.
Chapter 1
2, 3, 4, 9, 20.
10-20, 30-35, 60-70.
2, 3, 4, 90-100, 105-115.
Cisco Nexus 7000 Series IP SLAs Commands
OL-27555-03