permit ip
permit ip
To create an access control list (ACL) rule that permits traffic matching its conditions, use the permit
ip command. To return to the default value, use the no form of this command.
Syntax Description
source destination
Command Default
None.
Command Modes
IP ACL configuration mode
Command History
Release
6.2(2)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to create an access control list (ACL) rule that permits traffic matching its
conditions:
switch(config)# ip access-list acl
switch(config-acl)# permit ip 10.2.2.20/24 10.1.1.1/32
switch(config-acl)#
Related Commands
Command
show ip sla auto group Displays the configuration including default values of IP SLAs auto-measure
Cisco Nexus 7000 Series NX-OS IP Service Level Agreements (SLAs) Command Reference
1-32
permit ip source destination
no permit ip source destination
Source network address and the destination network address.
Modification
This command was introduced.
Description
groups.
Chapter 1
Cisco Nexus 7000 Series IP SLAs Commands
OL-27555-03