Ip Access-List - Cisco Nexus 7000 Series Command Reference Manual

ip access-list

ip access-list
To define an IP access list access control list (ACL) in order to enable filtering for packets, use the ip
access-list command. To remove the settings, use the no form of this command.
Syntax Description
access-list-name
Command Default None
Command Modes Global configuration mode (config)
Command History Release
6.2(2)
Usage Guidelines This command does not require a license.
Examples This example shows how to define an IP ACL in order to enable filtering for packets.
switch(config)# ip access-list acl
switch(config-acl)#
Related Commands Command
ip sla schedule
ip sla group schedule
show ip sla
configuration
show ip sla statistics
show ip sla statistics
aggregated
Cisco Nexus 7000 Series NX-OS IP Service Level Agreements (SLAs) Command Reference
1-18
ip access-list access-list-name
no ip access-list access-list-name
Access list name. The maximum size is 64 characters.
Modification
This command was introduced.
Description
Configures the scheduling parameters for a single IP SLAs operation.
Configures the group scheduling parameters for multiple IP SLAs
operations.
Displays configuration values including all defaults for all IP SLAs
operations or the specified operation.
Displays the current operational status and statistics of all IP SLAs
operations or a specified operation.
Displays the aggregated statistical errors and distribution information for all
IP SLAs operations or a specified operation.
Chapter 1 Cisco Nexus 7000 Series IP SLAs Commands
OL-27555-03