Cisco Nexus 7000 Series Command Reference Manual page 34

ip sla group schedule
Usage Guidelines Although the IP SLAs multioperation scheduling functionality helps in scheduling thousands of
operations, you should be cautious when specifying the number of operations, the schedule period, and
the frequency to avoid any significant CPU impact.
This command does not require a license.
Examples This example shows how to schedule IP SLAs operations 3, 4, and 6 to 10 (identified as group 1) using
multioperation scheduling. In this example, the operations are scheduled to begin at equal intervals over
a scheduled period of 20 seconds. The first operation (or set of operations) is scheduled to start
immediately. Because the frequency is not specified, it is set to the value of the schedule period (20
seconds) by default.
switch# ip sla group schedule 1 3, 4, 6-10 schedule-period 20 start-time now
switch#
This example shows how to schedule IP SLAs operations 1 to 3 (identified as group 2) using the random
scheduler option. In this example, the operations are scheduled to begin at random intervals over a
schedule period of 50 seconds. The first operation is scheduled to start immediately. The frequency at
which each operation restarts is chosen randomly within 80 to 100 seconds.
switch# ip sla group schedule 2 1-3 schedule-period 50 frequency range 80-100 start-time
now
switch#
Related Commands Command
ip sla schedule
show ip sla
configuration
show ip sla group
schedule
Cisco Nexus 7000 Series NX-OS IP Service Level Agreements (SLAs) Command Reference
1-24
Description
Configures the scheduling parameters for a single IP SLAs operation.
Displays the configuration details of the IP SLAs operation.
Displays the group scheduling details of the IP SLAs operations.
Chapter 1 Cisco Nexus 7000 Series IP SLAs Commands
OL-27555-03