Owner 130 - Cisco Nexus 7000 Series Command Reference Manual

Chapter 1 Cisco Nexus 7000 Series IP SLAs Commands
owner
To configure the Simple Network Management Protocol (SNMP) owner of a Cisco NX-OS IP Service
Level Agreements (SLAs) operation, use the owner command in the appropriate submode of IP SLA
configuration. To return to the default value, use the no form of this command.
Syntax Description
string
Command Default
No owner is specified.
Command Modes IP SLA configuration mode (config-ip-sla)
UDP echo configuration mode (config-ip-sla-udp)
UDP jitter configuration mode (config-ip-sla-jitter)
Command History Release
6.1(1)
Usage Guidelines
The owner name contains one or more of the following: ASCII form of the network management
station's transport address, network management station name (that is, the domain name), and network
management personnel's name, location, or phone number. In some cases, the agent itself will be the
owner of the operation. In these cases, the name can begin with "agent."
This command does not require a license.
Examples
This example shows how to set the owner of IP SLAs UDP echo operation 1 to 1234:
switch(config)# ip sla 1
switch(config-ip-sla)# udp-echo 192.168.202.169 9006
switch(config-ip-sla-udp)# owner 1234
switch(config-ip-sla-jitter)# ip sla schedule 1 life forever start-time after 00:00:06
switch(config)#
Related Commands Command
show ip sla auto group Displays the configuration including default values of IP SLAs auto-measure
OL-27555-03
owner string
no owner
Name of the SNMP owner. The maximum size is 127 characters.
Modification
This command was introduced.
Description
groups.
Cisco Nexus 7000 Series NX-OS IP Service Level Agreements (SLAs) Command Reference
owner
1-31