Cisco Nexus 7000 Series Command Reference Manual page 75

Chapter 1 Cisco Nexus 7000 Series IP SLAs Commands
Examples This example shows how to configure operation 6 as a UDP jitter operation with the destination IPv4
address 172.30.125.15, the destination port number 2000, 20 packets, and an interpacket interval of 20
ms:
switch(config)# ip sla 6
switch(config-ip-sla)# udp-jitter 172.30.125.15 2000 num-packets 20 interval 20
!
switch(config-ip-sla-jitter)#
Related Commands Command
ip sla responder udp
echo ipaddress
ip sla
request-data-size
OL-27555-03
Description
Permanently enables the IP SLAs responder functionality on a specified IP
address and port.
Begins the configuration for an IP SLAs operation and enters IP SLA
configuration mode.
Sets the payload size for IP SLAs operation request packets.
Cisco Nexus 7000 Series NX-OS IP Service Level Agreements (SLAs) Command Reference
udp-jitter
1-65