Cisco Nexus 7000 Series Command Reference Manual page 46

set ip default next-hop
set ip default next-hop
To configure a route map that sets the next-hop IPv4 address as the default, use the set ip default
next-hop command. To delete an entry, use the no form of this command.
Syntax Description
ip-address
load-share
verify-availability
Defaults Disabled
Command Modes
Route-map configuration (config-route-map)
Supported User Roles
network-admin
vdc-admin
Command History Release
4.0(1)
Usage Guidelines An ellipsis (...) in the command syntax indicates that your command input can include multiple values
for the ip-address argument.
Use this command to provide certain users a different default route. If the software has no explicit route
for the destination in the packet, it routes the packet to this next hop. The first next hop specified with
the set ip default next-hop command needs to be adjacent to the router. The optional specified IP
addresses are tried in turn.
Use the ip policy route-map command, the route-map global configuration command, and the match
and set commands to define the conditions for policy routing packets. The ip policy route-map
command identifies a route map by name. Each route-map command has a list of match and set
commands associated with it. The match commands specify the match criteria—the conditions under
which policy routing occurs. The set commands specify the set actions—the particular routing actions
to perform if the criteria enforced by the match commands are met.
Cisco Nexus 7000 Series NX-OS IP Service Level Agreements (SLAs) Command Reference
1-36
set ip default next-hop ip-address [...ip-address] [load-share | verify-availability]
no set ip default next-hop ip-address [...ip-address]
IPv4 address of the next hop to which packets are output.The next hop must be
an adjacent router. You can configure up to 32 IP addresses.
(Optional) Enables load sharing.
Verifies the reachability of the tracked object.
Modification
This command was introduced.
Chapter 1 Cisco Nexus 7000 Series IP SLAs Commands
OL-27555-03