History Filter - Cisco Nexus 7000 Series Command Reference Manual

Chapter 1 Cisco Nexus 7000 Series IP SLAs Commands

history filter

To define the type of information kept in the history table for a Cisco NX-OS IP Service Level
Agreements (SLAs) operation, use the history filter command. To return to the default value, use the no
form of this command.
Syntax Description
all
failures
none
all
overThreshold
Command Default No IP SLAs history is kept for an operation.
Command Modes
TCP connect configuration mode (config-ip-sla-tcp)
UDP echo configuration mode (config-ip-sla-udp)
Command History Release
6.1(1)
Usage Guidelines Use the history filter command to control what gets stored in the history table for an IP SLAs operation.
To control how much history gets saved in the history table, use the history lives-kept, history
buckets-kept, and the samples-of-history-kept commands.
This command does not require a license.
Examples This example shows how to collect only the operation packets that have failed and are kept in the history
table:
switch(config)# ip sla 1
switch(config-ip-sla)# udp-echo 192.199.199.2 1
switch(config-ip-sla-udp)# history filter failures
switch(config-ip-sla-udp)#
Related Commands Command
show ip sla auto group Displays the configuration including default values of IP SLAs auto-measure
OL-27555-03
history filter {all | failures | none | overThreshold}
no history filter {all | failures | none | overThreshold}
Specifies that operations attempted are kept in the history table.
Specifies that packets that fail for any reason are kept in the history table.
Specifies that no history is kept. This is the default.
Specifies that operations attempted are kept in the history table.
Specifies that only packets that are over the threshold are kept in the
history table.
Modification
This command was introduced.
Description
groups.
Cisco Nexus 7000 Series NX-OS IP Service Level Agreements (SLAs) Command Reference
history filter
1-11