Connect To An Ethernet Network; How To Connect To Virtual Private Networks - Honeywell Dolphin CT50 User Manual

Connect to an Ethernet Network

By default, the CT50 is configured to obtain IP addresses automatically through
the DHCP server. In most cases, you can simply insert the CT50 into an Ethernet
dock and connect to the Ethernet network. To connect the computer to an Ethernet
network, you need an Ethernet dock.
1. Make sure the dock is connected to your Ethernet network.
2. Place the computer in the dock.
3. Tap All Apps > DiagnosticInfoW10 to view the assigned IP address.

How to Connect to Virtual Private Networks

The computer supports connecting to virtual private networks (VPNs). To configure
VPN access, you must obtain details from your network administrator. To establish
a VPN connection, you must first create a VPN profile on the CT50.
Add a VPN Profile
Before you can connect to a VPN, you must add VPN information.
1. Tap All Apps > Settings > Network & Wireless > VPN.
2. Tap
3. From the VPN provider box, select a provider from the drop-down list.
4. In the Server name or address box, type the server name or IP address of the
5. In the VPN type box, choose one of the following:
Note: The VPN service provider only appears in the options if you have already downloaded
and installed the service provider app. If necessary, you can touch the link under the
Type box to connect and download an SSL VPN app from the Windows Store.
6. Select the Type of sign-in info required to connect to the VPN server and then
7. (Optional) Type a User Name and Password.
8. Tap Save. The VPN connection appears on the screen.
Dolphin CT50 with Windws 10 IoT User Guide
to Add a VPN connection.
VPN server.
• Point to Point Tunneling Protocol (PPTP)
• L2TP/IPsec with certificate
• L2TP/IPsec with pre-shared key
• KEv2
type the required information.
47