Disable Wi-Fi Notifications; Connect To An Ethernet Network; How To Connect To Virtual Private Networks - Honeywell Dolphin CT50 User Manual

Disable Wi-Fi Notifications

By default, when Wi-Fi is enabled, you receive notifications in the Status bar when
the computer discovers a wireless network. You can disable these notifications.
1. Tap All Apps
2. Tap
3. Tap the Network notification slider to disable notifications.

Connect to an Ethernet Network

To connect the computer to an Ethernet network, you need an Ethernet dock.
1. Make sure the dock is connected to your Ethernet network.
2. Place the computer in the dock.
3. Tap All Apps
4. When the switch turns blue, Ethernet is enabled.
5. Tap Ethernet Settings. The Ethernet list shows the name of the current
6. (Optional) To assign a static IP address, tap the connection name (for example,

How to Connect to Virtual Private Networks

The computer supports connecting to virtual private networks (VPNs). This section
describes how to add and connect to VPNs. To configure VPN access, you must
obtain details from your network administrator. You view and change VPN settings
in the Settings App.
Note: Before you can access VPNs, you need to set a lock screen PIN or password.
Dolphin CT50 powered by Android 6.0 User Guide
> Settings
and then tap Advanced. The Advanced Wi-Fi menu appears.
> Settings
slider is in the On position (Ethernet is enabled by default).
Ethernet connection. By default, the computer assumes a DHCP connection,
and that your network has assigned an IP address automatically. If DHCP is
working, the Ethernet dock should indicate that communication with the
network is occurring.
eth0). The IP settings dialog box appears.
a. Tap DHCP and then select Static from the list.
b. Enter the required network information and then tap Apply.
> Wi-Fi.
> Ethernet and make sure that the Ethernet
53