Restart The Computer; Clean Boot The Computer - Honeywell Dolphin CT50 User Manual

Restart the Computer

You may need to restart the computer to correct conditions where an application
stops responding to the system.
1. Save your files and close any open applications.
2. Press and hold the Power button until this screen appears:
3. Swipe down toward the bottom of the screen to power off the CT50. The word
4. Press the Power button to turn on the CT50.
If the touch screen is unresponsive:
•

Clean Boot the Computer

If reset does not work, use a clean boot to get the computer up and running for fur-
ther troubleshooting.
When you perform a clean boot, all personal content is erased and all factory
default settings are restored on the computer. The clean boot discards any account
information you may have added, including your Microsoft account information.
Only installed Microsoft over-the-air (OTA) updates persist after a clean boot.
Caution: A clean boot erases the memory on the computer, including all
54
"Goodbye" appears on the screen as the computer powers off.
Press and hold the Power button for approximately 13 seconds. The computer
automatically restarts.
applications and data files with the exception of the information found
in any removable storage. You must re-implement any custom
provisioning after a clean boot.
Dolphin CT50 with Windows 10 IoT User Guide